iCarsoft CR IMMO is a programming device for dashboards, engine computers, the entire key system. The device is also able to perform other programming tasks and standard car diagnostics.
Main functions of the device (translation may contain errors)
- Comprehensive OBD relearning coverage, supports CAN FD (requires additional adapter) and DoIP protocols.
- On-screen relearning procedure.
- Read &Clear codes for all available systems.
- Present live data in text, graph, and analog form for easy data visualization.
- Auto VIN technology can automatically quickly determine model and year information.
- Power-On Test / Dual Directory Test is used to access vehicle specific subsystems and component tests.
- Steering Angle Sensor (SAS) Calibration: Calibrates the steering straight ahead or recalibrates the SAS when the steering part is changed.
- Oil Light/Service Reset: Support service light reset, service mileage and service intervals.
- Electronic Parking Brake (EPB): System maintenance disables and re-enables the EPB system for replacement and initialization.
- Diesel Particulate Filter (DPF): Regeneration Control System, requires a DPF regeneration process until the DPF becomes clogged and turns off the DPF indicator.
- Battery Management System (BMS): Registers a new battery to the BMS when changing the battery.
- Electronic Throttle Control (ETC): Relearns the throttle valve control value while free or replaces the throttle valve.
- ABS Bleeding: Bleed air to restore ABS brake sensitivity, or retrain before ABS is replaced.
- Injector Coding: Relearn the injector control parameter while the injector is being updated or replaced.
- Support TPMS programming service: it allows you to search tire sensor ID from vehicle ECU, input TPMS sensor replacement ID and check sensors.
- IMMO Service: This function enables the anti-theft key matching function to recognize the car's immobilizer control system and enable the remote control keys to use the car normally.
- Air suspension: Try resetting the electronic suspension air ride using the message system, close all doors, disable the message system, go to suspension reset, or turn it off.
- Resetting the gearbox: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. When you perform this procedure, the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how to drive by monitoring your driving pattern. Follow this TCU/ECU programming method to drive the car.
- Air filter Self-learning process after changing the air filter.
- Seat Match, this program performs the initialization of the power seat's adaptive memory.
- Windows/Doors/Roof, door glass replacement and battery replacement on certain year, make, model vehicles require special steps to properly replace and reprogram the vehicle for proper power windows operation, door window glass position can be learned by running this routine, which enables anti-squeeze and one-touch functionality.
- Supports ADblue Reset.
- Supports Stop/Start Reset.
- Supports tire retreading.
- Powered by Gear Learning.
- Supports coolant recovery.
- Supports NOX sensor reset.
- Supports transport mode reset.
- Language Change, this routine is to change the language displayed on the device screen.
- Automatic software update.
- Easy to answer test questions online.
- Provides user-friendly instructions in the interface.
- Note! * Some functions may be restricted by the vehicle manufacturer as a special factory access code is required.
Basic functions of the IM2000 PROGRAMMER (translation may contain errors)
- Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
- Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
- Supports 5th generation For Audi (0AW/0B5) transmission ECU replacement.
- Supports reading, writing and cloning of the fourth generation VW UDS engine ECU.
- Supports BMW E chassis 8HP gearbox ECU reprogramming to blank.
- Works with a reprogrammer to backup/restore programming data (for Bosch/Siemens engine ECUs).
- Built-in Key Alignment/Copying, Anti-Theft IC Read & Write, ECU Read & Write, etc.
- Supports common major ECU/MCU/EEPROM manufacturers with more than 1200 product models and constantly updated.
- ECU replacement for VW/AUDI non-35XX device is supported if disassembly is missed (it can be read directly via independent wire without removing the IC).
- Supports ECU replacement with fourth generation VW/AUDI engine
- Supports ECU replacement for fifth generation VW/AUDI Bosch and Siemens engines.
- Supports all lost and replaced fourth generation AUDI EZS, convenient ECU and KESSY IC.
- Supports BMW F and G chassis 8hp gearbox ECU reprogramming to blank.
- Supports BMW CAS4/CAS4+ module replacement.
- Supports ECU cloning and replacement of BMW Siemens engines.
- Clear Mercedes-Benz engine and transmission password via 3S.
- Add Mercedes-Benz key password calculation function in 1 minute.
Supported Languages: English, German, Dutch, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hungarian, Traditional Chinese, Korean, Slovenian, Romanian
Computer specifications
- CPU: 4 cores 1.8 GHz
- Memory: 4 GB
- ROM: 64 GB
- Screen size: 8 inches
- Resolution: 1280*800 pixels
- Camera: 8 MP rear camera
- Operating voltage: 5V
- Working current: ≤3A
- Working environment: 0℃ ~45℃
- Storage environment: -10℃~60℃
VCI bluetooth adapter
This bluetooth adapter is used to receive vehicle data and then send this data to the tablet.
- Operating voltage: 12V
- Operating current: ≤60mA
- Working environment: 0℃ ~50℃
- Storage environment: -10℃~60℃
IM2000 PRO add-on
With the help of this accessory, you will be able to perform all key and immo system programming through your main computer.
- Input voltage: 12V
- Input current: 500mA
- Working environment: 0℃ ~50℃
- Storage environment: -20℃~70℃
Complete set
1 pc. x CR IMMO computer;
1 pc. x VCI (bluetooth) adapter;
1 pc. x IM2000 PRO IMMO programmer;
1 pc. x OBD II extension cable;
1 pc. x USB cable;
1 pc. x power cable;
1 pc. x USB cable (mini B);
1 pc. x Non-16pin cable;
1 pc. x cigarette/power cable;
1 pc. x OBD I adapter box;
1 pc. x main diagnostic cable;
1 pc. x chip adapter;
1 pc. x MCU_V1 PCBA;
1 pc. x MCU_V2 PCBA;
1 pc. x EEPROM PCBA;
1 pc. x MB-Key;
1 pc. x INS Cable V1;
1 pc. x INS Cable V2;
1 pc. x MCU Cable V1;
1 pc. x Bench Mode Cable;
1 pc. x Matching Adapter A;
1 pc. x Matching Adapter B;
1 pc. x Matching Adapter C;
1 pc. x Matching Adapter D;
1 pc. x Matching Adapter E;
1 pc. x programmer power supply;
1 pc. x license key envelope;
1 pc. x user guide;
Warranty 2 years. Free updates for 3 years (continuing to work).
