iCarsoft CR MAX is a professional and powerful diagnostic equipment that allows you to accurately diagnose complex problems. The equipment allows for comprehensive diagnostics of the ECU and other systems of most vehicle brands. Scan and clear errors from all car systems. Live settings in text, graph, or analog to make it easier to view data. Extensive service features.
Key features
- Read and clear fault codes Many electronic systems such as engine, transmission, ABS, airbag and more.
- Full ECU diagnostics
- Oil bulb / service reset
- Electronic parking brake (EPB) System Maintenance, Shut down and reactivate the EPB system so that you can change and initialize it.
- Battery Management System (BMS) When replacing the battery, register a new battery with the BMS.
- Diesel Particulate Filter (DPF)
- ABS bleeding | Bleed the air to restore the sensitivity of the ABS brakes, or re-learn when the ABS is replaced.
- Airbag | Crash data recovery.
- Electronic Throttle Control (ETC)
- Steering Angle Sensor (SAS) Calibrate the steering wheel.
- Enabling the fuel pump
- Air filter Self-calibration after replacing the air filter.
- Engine (ECM) This feature supports routine maintenance of engine modules, such as resetting or deleting adaptation values and calculating fuel consumption.
- Trans Adaptation (TCM) The function supports routine maintenance of the transmission modules, such as resetting the adaptation values and adjusting the oil level.
- Air suspension Reset electronic suspension air travel message system Close all doors, turn message system over, go to suspension reset or deactivation
- ACS (air conditioning) The function supports routine maintenance of air conditioning modules. Air conditioning system adaptation reset, air conditioner compressor operation, air conditioner compressor operation, stepper motor initiation.
- Headlamp Maintenance and other related operations (including setting the AFS), then perform this function for calibration.
- TPMS The function includes displaying the sensor ID from the vehicle ECU, entering the TPMS sensor replacement lD and testing the sensors.
- Motor shaft adjustment Can be run when the idle speed error is cleared. Set the car engine to idle.
- Customization function Allows you to perform adaptive learning / recovery / calibration and other functions of each control module. It contains some important module data for adjusting the parameters, such as customizing the remote control.
- Nozzle coding update or replace the nozzle, re-learn the nozzle control setting.
- Bidirectory Test Used to access the vehicle-specific subsystem and component tests.
- Special functions Seat, door window, etc .: Appropriate calibration functions after repair or replacement.
Supported languages: English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian
Supported cars
- European manufacturers: Alfa Romeo / Audi / BMW / Citroën / Dacia / Fiat / Ford EU / Jaguar / Lancia / LandRover / Mercedes-Benz / Mini / Opel / Peugeot / Porsche / Renault / Saab / Seat / Skoda / Smart / Vauxhall / Volkswagen / Volvo
- Asian manufacturers: Acura / Daewoo / Honda / Hyundai / Infiniti / Isuzu / Kia / Lexus / Mazda / Mitsubishi / Nissan / Scion / Subaru / Suzuki / Toyota
- American manufacturers: Chrysler / Ford US / GM
- Australian manufacturers: Ford AUS / Holden
Specification
- Operating system Android 8.1.0
- Processor 4 Nuclear 1.3 GHz
- Memory 16 GB
- Show | 7 - inch LCD capacitive touch screen with 1024x600 resolution
- Merger MINI USB 2.0 / USB2.0 / WI-FI / Bluetooth / OBDII
- Audio output Loudspeaker and audible signal
- Power and battery 3.7 V / 5000MAH lithium polymer battery
- Tested battery life Approximately 5 hours of continuous use
- Battery charger 5V / 2A
- Energy consumption 500MA (LCD screen on, default brightness, WI-FI on) @ 3.7 V
- Operating temperature 0 to 40 ° C (32 to 104 ° F)
- Storage temperature -20 to 70 ° C (-4 to 158 ° F)
- Operating humidity 5-95% non-condensing
- Dimensions 40.0MMx150.0MMx35.0MM (WxHxD)
- Color | Black
- Net weight 750G
Complete set
1 pc. x iCarsoft CR MAX Professional tablet;
1 pc. x External power adapter;
1 pc. x OBDII main cable ;;
1 pc. x User manual;
1 pc. x Short guide;
1 pc. x Data cable;
1 pc. x Tray;
Warranty 12 months. FREE UPDATES.
